Menu

Omega Spółka z o.o.

Omega Sp. z o.o. company was established in the year 2001. The main activity is orientated on renting and managing of the real estate. The company is conducting a wide range of developing activities and managing maintenance and service over its own production plants, warehouses, offices, residential flats, church, embassy etc .The company owns premises in Bydgoszcz, Warsaw and Amsterdam. Our policy and professional approach have proved to be successful in the real estate market through all the years.

 

Storage building no. 4 & 5

ul. Przemysłowa 34 Bydgoszcz

Additional Info

  • Address: ul. Przemysłowa 34 Bydgoszcz
  • Surface: 3.876.00
  • Localisation: Show on map

Opis

Purpose of the building - production and storage with employee amenities and with an office and laboratory part.

I. Building parameters: storage building
- footprint area:   3.988,50 m²
- cubic capacity: 27.690,40 m²

Divided into three parts:
- 1st: size 24/54.44 m, separated with an internal layered wall from the 2nd one, size 36/ 54.44 m; the 3rd one is separated with the brick wall, thickness 25 cm, covered with plaster.

II. Flat roof, ceiling
a) for the whole building
- 2x thermo-weldable tar paper,
- mineral wool, thickness 15cm,
- PVC foil, thickness 0.25 mm,
- T55 trapezoidal metal sheet, thickness 0.75mm
- steel purlins,
- load-bearing steel structure - frame;

b) elements of roof transoms
- fixed polycarbonate roof transoms 3/12 m; 
  and smoke dampers 1.60/2.50 m located at the roof ridges.

III. External walls
a) external walls non-adjacent to other buildings - layered,
- T35 trapezoidal metal sheet,
- PVC foil, thickness 0.25mm
- mineral wool, thickness 12cm
- T35 trapezoidal metal sheet,
- load-bearing steel structure;

b) external wall adjacent to building no. 3
- plastered brick wall, thickness 25cm

b 1) internal wall shared with the office building
- plastered brick wall, thickness 25cm

b 2) internal wall shared with building no. 1
- layered wall
- T35 trapezoidal metal sheet,
- PVC foil, thickness 0.25mm,
- mineral wool, thickness 12cm,
- T35 trapezoidal metal sheet,
- load-bearing steel structure;

wall of building no. 1
- air gap and plaster-covered polystyrene foam, thickness 10cm;
- aerated autoclaved concrete wall, thickness 24 cm, rims, plaster-covered;

c) windows and elements of communication - gates, doors

I. External wall
- windows from the undeveloped part- fixed, at the height of approx. 4m, size: 6.0/1.2 m, with reinforced glass
- panel lift doors 4.00/ 3.0m and 3.0m/ 3.0m
- emergency exit door 90/200

II. Internal wall from the side of the building no. 3
- brick wall without windows,
- emergency exit door 90/200 in panel lift doors.

III. Internal wall from the side of the office building.
- brick wall without windows,
- emergency exit fire door 90/200.

IV. Internal wall from the side of the building no. 1
- brick wall without windows,
- emergency exit fire door 90/200, and fire protection gate 360/360 cm.

d) Concrete floor (durobeton) (concrete made ​​as a floor layer thickness of 20 cm
- a layer of mashed topping wear-resistant surface
- concrete floor B-30 fiber reinforced stalbet in the amount of 25kg/m3
- PVC film thickness of 0.25 mm
- ballast 30cm.
- maximum load floor of 15 tons/m2.)

e) Internal walls of solid brick, thickness 25 and 12 cm and of aerated autoclaved concrete thickness 24 and 12 cm.Walls covered with plaster.

f) In a part of the building- the internal area of a workshop character and employee amenities, ceiling to the level of approx. 3m, made of drywall on a mounting frame.

g) installations and systems:

- hydrant system DN80 and internal hydrants HP52,
- electrical system,
- lighting protection,
- central heating- heating units,
- natural roof ventilation - does not exist,
- sanitary - present in a sanitary part and in employee amenities.
Other information in the property survey drawing.

Contact us

Using the form

 
CAPTCHA